LAWLESSSeal The Deal Loose Setting Powder
You’ve got options!
Start with the foundation you currently use to find a matching shade from this brand.
A talc-free, lightweight, soft-focus translucent setting powder with three universal shades that imparts a flawless, airbrushed finish.
What it does:
Seal the Deal locks in your makeup while absorbing oil and shine throughout the day. This ultrafine, universal, translucent powder perfects every skin tone, imparting a flawless, airbrushed, and pore-less finish without any harmful ingredients. It is perfect for baking or simply dusting all over the face to lightly set your base.
What else you need to know:
Annie wanted to create a completely talc-free translucent setting powder that uses the absence of talc to its advantage. Talc's density can make it heavy and drying, which is one of the biggest reasons powders can tend to accentuate fine lines and cling to texture on the skin. Instead of talc, LAWLESS uses mica as the base of Seal the Deal Loose Translucent Setting Powders. Mica has a very lightweight, translucent finish that sets makeup all day without adding any weight or cakiness, or disturbing the finish of your base.
Clean at Sephora
Clean at Sephora is formulated without a list of over 50 ingredients, including sulfates (SLS and SLES), parabens, phthalates, and more. For the full list, check out the Ingredients tab.
-Dip a fluffy brush into the powder, tap off the excess, and gently sweep the powder across the entire face, or onto specific targeted areas to set your base makeup.
-Press a velour puff into the loose powder and work the powder into the puff, or press a damp beauty sponge into the loose powder.
-Gently press the puff or sponge onto the skin where you wish to place the bake.
-After five to 10 minutes, lightly dust off the excess powder with a soft powder brush for makeup that lasts all day.
-Tip: Leave your bake sitting under the eyes to catch eyeshadow fallout while doing your eyeshadow if you have already done your base. Simply dust away the bake along with the fallout when your eye look is complete.
-Tip: For even longer-lasting base makeup, dust a very sheer layer of translucent powder over bare skin before applying foundation. This gives the liquid something to grip onto. Be careful to only use a very small amount of powder or it can turn cakey
Clean at Sephora products are formulated without:
SulfatesSLS + SLES, Parabens, Formaldehydes, Formaldehyde-releasing agents, Phthalates, Mineral Oil, Retinyl Palmitate, Oxybenzone, Coal Tar, Hydroquinone, Triclosan, Triclocarban, Undisclosed synthetic fragrances (Products can be formulated with disclosed synthetic fragrances that meet the following two criteria: (1) the synthetic fragrances do not include any of the ingredients listed in numbers 1 through 12 above and (2) the synthetic fragrances are at a concentration below 1% of the total formula) The following type of acrylates: (ethyl acrylate, ethyl methacrylate, methyl methacrylate, butyl methacrylate, hydroxypropyl methacrylate, tetrahydrofurfuryl methacrylate, trimethylolpropane trimethacrylate , aluminum salts), Animal Oils/Musks/Fats, Benzophenone + Related Compounds, Butoxyethanol, Carbon Black, Lead/Lead Acetate, Methyl Cellosolve + Methoxyethanol, Methylchloroisothiazolinone & Methylisothiazolinone, Mercury + Mercury Compounds (Thimerisol), Insoluble Plastic Microbeads (This prohibited ingredient applies to products that are meant to be rinsed off ), Resorcinol, Talc (Talc that is free of any asbestos can be used in the formulation provided that Brand conducts testing to ensure that talc is free of any asbestos.), Toluene, Butylated hydroxyanisole (BHA), Butylated hydroxytoluene (BHT) that is 0.1% or more of total formula, Ethanolamines DEA/TEA/MEA/ETA, Nanoparticles as defined by the European Commission, Petrolatum and Parrafin that is not USP grade, Phenoxyethanol that is 1% or more of total formulation, Polyacrylamide & Acrylamide, The following types of Styrene (Bromostyrene, Deastyrene/acrylates/dvbcopolymer, sodium styrene/divinylbenzene copolymer , styrene oxide, styrene), 1,4 Dioxane in final formulas must comply with the thresholds as follows: (10 or < ppm for products that are meant to be rinsed off, wiped off or removed, 3ppm or < for products that are meant to remain on the skin).
At LAWLESS, we’re committed to providing beauty products that are Always Free of ingredients that harm your skin, your health, the earth, and animals. We don’t take the term ‘clean’ lightly. We really are Clean AF. None of our ingredients are known to be cancer causing or endocrine disrupting.
—Annie Lawless, Founder and CEO
Get more information about
If you are not completely satisfied with an online purchase or gift, you may return your U.S.or Canadian purchase in stores or by mail. Restrictions apply for returns made outside the U.S.