Roll over or click image to zoom in



$499.00
($565.00 value)
What it is: The special gift edition set features the Dyson Corrale&trade with a complimentary Dyson-designed paddle brush and detangling comb for the ultimate end to end styling experience.
Hair Type: Straight, Wavy, Curly, and Coily
Hair Texture: Fine, Medium, and Thick
Key Benefits:
- Cord-free with the thermal performance of a corded straightener
- 50 percent less breakage
- Less frizz and fewer flyaways
What Else You Need to Know: This is the only straightener with flexing plates that shape to gather hair. Use corded or cord-free. Flexing manganese copper alloy plates shape around your hair. This extra control allows you to create the same style but with less heat - and half the damage. The special gift edition features the Dyson Corrale™ with Dyson-designed paddle brush and detangling comb.
The most awarded hair straightener of 2020 based on industry recognized awards.
Product Details:
- Suitable for all hair types: Three precise heat settings (330°F, 365°F and 40°F) to suit your hair type, length and desired style.
- Manganese copper plates: Manganese copper alloy selected for its flexibility, strength, and thermal conduction.
- Up to 30 minutes cord-free styling2: Delivers the same thermal performance of a corded straightener. Fully recharges in just 70 minutes.
- Engineered for balance: Weight is balanced in the hand to give maximum control while styling.
- OLED Screen: displays battery level, temperature control and charging status during use.
- Auto shut-off and Safety lock: Switches off after 0 minutes of inactivity for added peace of mind. Safety lock allows for immediate storage after use.
- Ready to travel: Universal voltage and a battery disabler that is TSA-approved and safe to fly with.
- Enhanced styling: By gathering hair for more control, flexing plates produce shiny, straight results—with less frizz and fewer flyaways.
- Intelligent heat control: Regulates the temperature of the plates 00 times a second, ensuring you never exceed your chosen temperature.Less heat, half the damage: Flexing plates gather your hair for more control, so you can achieve the same style with less heat and 50 percent less breakage. Dyson recommends styling with a heat setting below what you normally use.
- Flexing Plates: the only straightener with flexing plates that shape around your hair, gathering it neatly together on each pass. By gathering hair for more control, this allows for a lighter grip when styling.
- Ready to style when you are: With 90 percent battery charge in just 40 minutes, using the magnetic charging cable or dock.
- Extend run time: Place in the dock when not in use and in between sections to extend run time. The OLED screen and chime will indicate that your machine is charging properly.
- Key sounds: Chimes to indicate your machine is heating up, chosen temperature reached, low battery, empty battery, charging, idle mode and service alerts. To turn off the prompt sounds, mute by holding the power and temperature buttons for 5 seconds.
This Set Contains:
- dyson Corrale™
- Paddle brush
- Detangling comb
- Charging dock
- Heat-resistant pouch
Hair Type: Straight, Wavy, Curly, and Coily
Hair Texture: Fine, Medium, and Thick
Key Benefits:
- Cord-free with the thermal performance of a corded straightener
- 50 percent less breakage
- Less frizz and fewer flyaways
What Else You Need to Know: This is the only straightener with flexing plates that shape to gather hair. Use corded or cord-free. Flexing manganese copper alloy plates shape around your hair. This extra control allows you to create the same style but with less heat - and half the damage. The special gift edition features the Dyson Corrale™ with Dyson-designed paddle brush and detangling comb.
The most awarded hair straightener of 2020 based on industry recognized awards.
Product Details:
- Suitable for all hair types: Three precise heat settings (330°F, 365°F and 40°F) to suit your hair type, length and desired style.
- Manganese copper plates: Manganese copper alloy selected for its flexibility, strength, and thermal conduction.
- Up to 30 minutes cord-free styling2: Delivers the same thermal performance of a corded straightener. Fully recharges in just 70 minutes.
- Engineered for balance: Weight is balanced in the hand to give maximum control while styling.
- OLED Screen: displays battery level, temperature control and charging status during use.
- Auto shut-off and Safety lock: Switches off after 0 minutes of inactivity for added peace of mind. Safety lock allows for immediate storage after use.
- Ready to travel: Universal voltage and a battery disabler that is TSA-approved and safe to fly with.
- Enhanced styling: By gathering hair for more control, flexing plates produce shiny, straight results—with less frizz and fewer flyaways.
- Intelligent heat control: Regulates the temperature of the plates 00 times a second, ensuring you never exceed your chosen temperature.Less heat, half the damage: Flexing plates gather your hair for more control, so you can achieve the same style with less heat and 50 percent less breakage. Dyson recommends styling with a heat setting below what you normally use.
- Flexing Plates: the only straightener with flexing plates that shape around your hair, gathering it neatly together on each pass. By gathering hair for more control, this allows for a lighter grip when styling.
- Ready to style when you are: With 90 percent battery charge in just 40 minutes, using the magnetic charging cable or dock.
- Extend run time: Place in the dock when not in use and in between sections to extend run time. The OLED screen and chime will indicate that your machine is charging properly.
- Key sounds: Chimes to indicate your machine is heating up, chosen temperature reached, low battery, empty battery, charging, idle mode and service alerts. To turn off the prompt sounds, mute by holding the power and temperature buttons for 5 seconds.
This Set Contains:
- dyson Corrale™
- Paddle brush
- Detangling comb
- Charging dock
- Heat-resistant pouch
Suggested Usage:
Tips and tricks for using the dyson Corrale™ straightener for the first time:
-Gently slide instructions off of the machine before inserting the flight-ready tag.
-Slide the lock button up to open your dyson Corrale™ straightener and insert the flight-ready tag. Should the flight-ready tag detach from the machine, hold the end of the cord with your fingers or tweezers and push the barbed end back into the hole on the machine.
Charging dock:
-Assemble the charging dock by putting the two pieces together and attaching the cable to the dock. Place Corrale on the dock to charge.
-Charge to 100 percent. For best results, always start styling with 100 percent charge.
Set temperature:
-Use the + or - button to select your desired styling temperature.
-You will hear another chime when Corrale reaches your desired temperature.
-dyson recommends you start at a lower temperature than usual.
Maximize run time with the charging dock:
-Place your Corrale straightener in the dock when not in use and in between sections to extend run time.
-The OLED screen and chime will indicate that your machine is charging properly.
-Turn on the machine: Press and hold the power button until you hear a chime.
Flying with Corrale:
-Before flying with Corrale, place the machine in flight-ready mode by disconnecting the flight-ready tab. This will disarm the battery.
Storing:
-When on the go, place in the heat-resistant travel pouch.
Key sounds:
-Chimes to indicate your machine is heating up, chosen temperature is reached, low battery, empty battery, charging, idle mode, and service alerts.
-To turn off the prompt sounds, mute by holding the power and temperature buttons for five seconds.
Styling tips:
-Prep hair: Before styling, ensure hair is detangled and completely dry. For best results, section hair.
-Temperature: Begin at a medium heat (365°F) and adjust up or down depending on your hair type and texture.
-Loosen grip: Because the flexing plates shape to gather your hair, you can loosen your grip when styling, letting the machine do the work for you.
-Style speed: Flexing plates allow you to style hair in one slow pass versus multiple quick passes. To slow down your movements, try using one second per inch as a baseline. Speed may vary by hair type.
-Tress size: The perfect tress size will depend on your hair type. Try a few different section sizes and see what works best for you. If you have coarse hair, begin with a smaller section. If you have fine hair, try larger sections for a smoother glide.
-Position of tress: To maximize the benefits of the flexing plates, ensure your tress is in the middle of the plates when styling.
-Styling your ends: If you have fine hair, it may be difficult to style your ends. For a smooth glide, try styling the roots and mid-lengths of hair first, and style the ends last so you can take larger sections of hair. This allows the flexing plates to fully gather the section of hair.
-Styling products: Finish with your favorite styling products.
Tips for smoothing:
-Start with completely dry hair.
-Begin with medium heat (365°F) and adjust up or down depending on your hair type and texture.
-Select one- to two-inch sections of hair (depending on hair density) for best performance.
-Smooth hair in a single, fluid motion from roots to ends.
-Create additional details such as beveled ends by rotating 45° to 90° inward or outward as you smooth ends of hair.
-To help get closer to the root, take sections at an angle.
-For finer hairline areas, reduce temperature.
-Finish with your favorite styling products.
Tips for curls and waves:
-Start with completely dry hair.
-Begin with medium heat (365°F) and adjust up or down, depending on your hair type and texture.
-Select one- to one-and-a-half-inch sections of hair (depending on hair density) for best performance.
-Clamp the section of hair and rotate the iron one full turn (for curls) or half turn (for softer waves).
Tips and tricks for using the dyson Corrale™ straightener for the first time:
-Gently slide instructions off of the machine before inserting the flight-ready tag.
-Slide the lock button up to open your dyson Corrale™ straightener and insert the flight-ready tag. Should the flight-ready tag detach from the machine, hold the end of the cord with your fingers or tweezers and push the barbed end back into the hole on the machine.
Charging dock:
-Assemble the charging dock by putting the two pieces together and attaching the cable to the dock. Place Corrale on the dock to charge.
-Charge to 100 percent. For best results, always start styling with 100 percent charge.
Set temperature:
-Use the + or - button to select your desired styling temperature.
-You will hear another chime when Corrale reaches your desired temperature.
-dyson recommends you start at a lower temperature than usual.
Maximize run time with the charging dock:
-Place your Corrale straightener in the dock when not in use and in between sections to extend run time.
-The OLED screen and chime will indicate that your machine is charging properly.
-Turn on the machine: Press and hold the power button until you hear a chime.
Flying with Corrale:
-Before flying with Corrale, place the machine in flight-ready mode by disconnecting the flight-ready tab. This will disarm the battery.
Storing:
-When on the go, place in the heat-resistant travel pouch.
Key sounds:
-Chimes to indicate your machine is heating up, chosen temperature is reached, low battery, empty battery, charging, idle mode, and service alerts.
-To turn off the prompt sounds, mute by holding the power and temperature buttons for five seconds.
Styling tips:
-Prep hair: Before styling, ensure hair is detangled and completely dry. For best results, section hair.
-Temperature: Begin at a medium heat (365°F) and adjust up or down depending on your hair type and texture.
-Loosen grip: Because the flexing plates shape to gather your hair, you can loosen your grip when styling, letting the machine do the work for you.
-Style speed: Flexing plates allow you to style hair in one slow pass versus multiple quick passes. To slow down your movements, try using one second per inch as a baseline. Speed may vary by hair type.
-Tress size: The perfect tress size will depend on your hair type. Try a few different section sizes and see what works best for you. If you have coarse hair, begin with a smaller section. If you have fine hair, try larger sections for a smoother glide.
-Position of tress: To maximize the benefits of the flexing plates, ensure your tress is in the middle of the plates when styling.
-Styling your ends: If you have fine hair, it may be difficult to style your ends. For a smooth glide, try styling the roots and mid-lengths of hair first, and style the ends last so you can take larger sections of hair. This allows the flexing plates to fully gather the section of hair.
-Styling products: Finish with your favorite styling products.
Tips for smoothing:
-Start with completely dry hair.
-Begin with medium heat (365°F) and adjust up or down depending on your hair type and texture.
-Select one- to two-inch sections of hair (depending on hair density) for best performance.
-Smooth hair in a single, fluid motion from roots to ends.
-Create additional details such as beveled ends by rotating 45° to 90° inward or outward as you smooth ends of hair.
-To help get closer to the root, take sections at an angle.
-For finer hairline areas, reduce temperature.
-Finish with your favorite styling products.
Tips for curls and waves:
-Start with completely dry hair.
-Begin with medium heat (365°F) and adjust up or down, depending on your hair type and texture.
-Select one- to one-and-a-half-inch sections of hair (depending on hair density) for best performance.
-Clamp the section of hair and rotate the iron one full turn (for curls) or half turn (for softer waves).
Get more information about
shipping rates, schedules, methods and restrictions
.If you are not completely satisfied with an online purchase or gift, you may return your U.S.or Canadian purchase in stores or by mail. Restrictions apply for returns made outside the U.S.